Communication is Power

VK-200IPCam : MPEG4/MJPEG/PoE CCD IP Camera

▪ Product Features

▪ Product Image

▪ SoC Embedded ARM-Linux
▪ NTSC@ 30fps, CIF (352*240), QCIF(176*120), Full
D1(720*480)
▪ PAL @ 25fps, CIF(352*288), QCIF(176*144), Full
D1 (720*576)
▪ Compression : MPEG-4 for video
▪ NTSC / PAL Auto Detection
▪ Video / Audio data rate can be adjusted
▪ Synchronizes video with audio compression
▪ Multiple clients service is more than 20Mbps streaming  
out and maximum 25 users view
▪ DHCP, PPPoE, Dynamic DNS, TCP/IP, UDP, SMTP, UPnP,
HTTP, RTSP, DNS client
▪ Watch Dog timer function
▪ USB 2.0 interface for external storage (HDD) or flash disk
▪ SD Slot supports card reader function
▪ Supports IE Browsing (ActiveX and Verisign)
▪ Supports dual stream (MPEG4 and MJPEG) at the same time
▪ Supports 3GPP, NTP time Setting
▪ Message in email
▪ Support 2-Way Audio function
▪ Provide Real Time Clock function ¡@
▪ Provides scheduling, recording, event list, management,
playback, transmitting, and recycle
▪ 64 Channels Display
▪ Snapshot, Motion Detect Recording, I/O Recording
▪ Auto Recovery when disconnected
▪ Supports Digital Zoom in/out on Preview and Playback
▪ Programmable IP / Subnet / Gateway (IE)
▪ Motion Detection Sensitivity: 1~9 (IE)
▪ Event : 2 alarm in, Motion Detect, Video Loss (IE)
▪ Action : 2 alarm out, E-mail alarm out (IE)
▪ Firmware upgrade from Ethernet (IE)
▪ Video quality setting : Contrast, Brightness, Saturation,
Hue (IE)
▪ Windows XP/2000 required ( DirectX  9.0C or Higher)
▪ Complies with CE, FCC, RoHS, and WEEE
▪ Product Spec
▪ Image Sensor : 1/3¡¨ color CCD Sensor

▪ Video Output : 1 BNC port

▪ Audio Input : Built-In microphone
▪ 1 Ethernet port
▪ 1 SD card slot
▪ 1 USB 2.0 port
▪ Power over Ethernet (PoE) module (Option)
▪ Hardware OSD for time display
▪ Environment : Temperature : 0~50 C degree; Humidity : 10%~90% (non-condensing)
▪ Complies with CE, FCC, RoHS, and WEEE

BACK

¡@