 |
 |
 |
 |
 |
|
VK-105CPE
: WiFi 11b/g Outdoor High Power Access Point with PoE |
|
▪
Product Features |
▪
Product Image |
|
|
 |
|
▪
Complies IEEE 802.11b/g standard,
10/100Mbps Ethernet |
|
Protocol. |
|
▪
Supports AP mode, Client mode, Bridge mode, WDS
|
|
(Wireless
Distributed System) mode, and Universal Repeater |
|
mode,
and RADIUS mode. |
|
▪
The maximum transmission power is 800mW. |
|
▪
Transmit power can be adjusted on the web user interface. |
|
▪
Supports 802.3af (48V PoE) |
|
▪
Integrates 14dBi dual polarity antenna. |
|
▪
Offers all mounting accessories. |
|
▪
Clone MAC
Address :
You can set
this CPE
to use the |
|
same MAC
address on all outgoing packets through the LAN |
|
interface. Thus the LAN network appears as a single device |
|
to the
external network. |
|
▪
Supports Power Saving to allow a computer to stop
|
|
transmitting through the wireless adapter during sleep |
|
mode. |
|
▪
Supports IAPP (Inter Access Point Protocol) to allow the |
|
wireless AP
to communicate
with
neighboring access points |
|
for
wireless roaming. |
|
▪
Provides the Turbo mode to enhance the wireless |
|
performance. |
|
▪
Wireless Security Options : WEP, WPA,
WPA2. |
|
▪
Supports 802.1x for
user authentication. |
|
▪
Specifies the RADIUS server information if you have an |
|
external
RADIUS
(Remote Authentication Dial-In User |
|
Service)
server
to
authenticate a user. |
|
▪
Provides Wireless
Access Control
Mode,
and MAC Filter. |
|
▪
The
DHCP Settings allows
you
to set the Dynamic Host |
|
Configuration Protocol (DHCP) server
settings on the |
|
wireless AP. |
|
▪
Uses Event Log to view log
records and manage log |
|
settings. |
|
▪
Upgrades firmware on the wireless AP through the web |
|
user
interface. |
|
▪
Robust
waterproof device case. |
|
|
|
|
|
|
|
|
|
▪
Product Spec |
|
|
|
¡@ |
|
▪
Standards : IEEE 802.11b/g, 10/100Mbps
Ethernet |
|
Protocol |
|
▪
Bus
Interface : |
|
(1)
14dBi Integrated
Detachable
Antenna |
|
(2)
One
802.3af PoE Ethernet Port |
|
▪
Channels :
Worldwide |
|
▪
Frequency Band :
2.4000 ~ 2.4835GHz |
|
▪
Modulation
:
OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) |
|
BPSK, QPSK, CCK (11b) |
|
▪
Data Rate : 54/48/36/24/18/12/11/9/6/5.5/2/1
Mbps |
|
auto fallback |
|
▪
Securities : |
|
(1)
64/128-bit WEP Data Encryption, WPA, WPA2 |
|
(2)
Built-in Firewall, MAC Filter |
|
(3)
Password protection for system management |
|
(4)
Event Log |
|
▪
Function
: |
|
(1)
AP mode, Client mode,
Bridge mode, WDS mode, and
|
|
Universal
Repeater mode, RADIUS mode |
|
(2)
Power
Saving, IAPP, Turbo mode |
|
(3)
WEP, WPA,
WPA2 |
|
(4) IEEE
802.1x and RADIUS server information for user |
|
authentication |
|
(5)
Wireless
Access Control
Mode |
|
(6)
DHCP Server,
Event Log |
|
(7)
Clone MAC
Address :
You can set
this CPE
to use
the |
|
same MAC
address on all outgoing packets through the LAN |
|
interface. Thus the LAN network appears as a single device |
|
to the
external network. |
|
|
|
▪
Transmit Power : MAX. 800mW,
it can be adjusted
|
|
from user interface. |
|
|
|
▪
Environment : Operating Temp. : 0~55 C
degree; Operating |
|
Humidity : 10% ~ 90% (Non-condensing) |
|
▪
Box Content
:
CD, Metal Bracket, Ribbon, Rubber Plug,
|
|
Power Adapter |
|
|
|
▪
Shipping Information : |
|
(1) 10 units per carton |
|
(2) Dimension : 53 cm * 28 cm * 63 cm per
carton |
|
(3) G.W. : 15Kgs per carton |
|
|
|
|
|
|
|
BACK |
|
¡@ |