 |
|||
 |
 |
 |
 |
|
VK-1000C : 10/100/1000Mbps Gigabit PCI Card |
|||
|
▪ Product Features |
▪ Product Image |
||
 |
|||
| ▪ Complies with IEEE802.3ab 1000BASE-T Gigabit Ethernet | |||
| standards, IEEE802.3u Fast Ethernet standards | |||
| ▪ Plug-and-Play installation | |||
| ▪ Supports PCI 2.1 / 2.2 / 2.3, 32-bit,33/66MHz | |||
| ▪ Supports half and full duplex at 10Mbps, half and full | |||
| duplex at 100Mbps, and full duplex at 1000Mbps | |||
| ▪ Auto-Negotiation to the highest available speed | |||
| ▪ Supports up to 128K Bytes Boot ROM | |||
| ▪ Supports IEEE802.1P Layer 2 Priority Encoding | |||
| ▪ Supports Full Duplex flow control (IEEE 802.3x) | |||
| ▪ Supports IEEE 802.1Q VLAN tagging | |||
| ▪ Supports PCI Message Signaled Interrupt (MSI) | |||
| ▪ Build-in FIFO buffers reduce overhead of memory transfers | |||
| ▪ Supports Microsoft NDIS5 Checksum Offload (IP, TCP, UDP) | |||
| and large send offload | |||
| ▪ Supports Jumbo Frame transfer | |||
| ▪ Complies with CE, FCC, RoHS, and WEEE | |||
| ▪ Product Spec | ¡@ | ||
| ▪ Standards : IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, | |||
| IEEE802.3x | |||
| ▪ Bus Interface : PCI 2.1 / 2.2 / 2.3, 66 / 33 MHz | |||
| ▪ Network Port : 10/100/1000Mbps RJ45 Connector (Auto- | |||
| MDI / MDI-X) | |||
| ▪ Environment : Operating Temp. : 0~60 C degree; Operating | |||
| Humidity : 10% ~ 90% (Non-condensing) | |||
| ▪ Shipping Information : | |||
| (1) 40 units per carton | |||
| (2) Dimension : 40 cm * 35 cm * 31 cm | |||
| (3) G.W. : 8 Kgs | |||
| (4) Accessory : CD, QIG | |||
| (5) Complies with CE, FCC, RoHS, and WEEE | |||
| ¡@ | |||